Total 40 Videos found in Category "Mechanical - Mechanical Vibrations"

1 Mod-1 Lec-1 Overview of the Course, Practical and Research Trends
2 Mod-1 Lec-2 Harmonic and Periodic Motions, Vibration Terminology
3 Mod-10 Lec-1 Rayleighs Energy Method
4 Mod-10 Lec-2 Matrix Iteration Method
5 Mod-10 Lec-3 Durkerley, Rayleigh-Ritz and Galerkin Method
6 Mod-11 Lec-1 Finite Element Formulation for Rods, Gear Train and Branched System
7 Mod-11 Lec-2 Finite Element Formulation for Beams: Galerkins Method
8 Mod-11 Lec-3 Global Finite Element Assembly and Imposition of Boundary Conditions
9 Mod-12 Lec-1 Vibration Testing Equipments: Signal Measurements
10 Mod-12 Lec-2 Vibration Testing Equipments: Signal Analysis
11 Mod-12 Lec-3 Field Balancing of Rotors
12 Mod-12 Lec-4 Condition Monitoring
13 Mod-2 Lec-1 Vibration Model, Equation of Motion-Natural Frequency
14 Mod-2 Lec-2 Energy Method, Principle of Virtual Work
15 Mod-3 Lec-1 Viscously Damped Free Vibration Special Cases: Oscillatory
16 Mod-3 Lec-2 Logarithmic Decrement Experimental Determination of Damping Coefficient Hysteresis Loop
17 Mod-3 Lec-3 Coulomb Damping other Damping Models
18 Mod-4 Lec-1 Forced Harmonic Vibration, Magnification Factor
19 Mod-4 Lec-2 Laplace Transform, Superposition Theorem
20 Mod-4 Lec-3 Rotor Unbalance and Whirling of Shaft, Transmissibility
21 Mod-4 Lec-4 Support Motion, Vibration Isolation
22 Mod-4 Lec-5 Sharpness of Resonance, Vibration Measuring Instruments
23 Mod-5 Lec-1 Generalized and Principle Coordinates, Derivation of Equation of Motion
24 Mod-5 Lec-2 Lagranges Equation
25 Mod-5 Lec-3 Coordinate Coupling
26 Mod-5 Lec-4 Forced Harmonic Vibration
27 Mod-6 Lec-1 Tuned Absorber, Determination of Mass Ratio
28 Mod-6 Lec-2 Tuned and Damped Absorber, Untuned Viscous Damper
29 Mod-7 Lec-1 Derivation of Equations of Motion, Influence Coefficient Method
30 Mod-7 Lec-2 Properties of Vibrating Systems: Flexibility & Stiffness Matrices, Reciprocity Theorem
31 Mod-7 Lec-3 Modal Analysis: Undamped
32 Mod-7 Lec-4 Modal Analysis: Damped
33 Mod-8 Lec-1 Simple Systems With One Two or Three Discs Geared System
34 Mod-8 Lec-2 Multi-Degree of Freedom Systems-Transfer Matrix Method Branched System
35 Mod-9 Lec-1 Derivation of Equations of Motion Part 1-Newtons and Hamiltons Principle
36 Mod-9 Lec-2 Derivation of Equations of Motion Part 2-Newtons and Hamiltons Principle
37 Mod-9 Lec-3 Vibration of Strings
38 Mod-9 Lec-4 Longitudinal and Torsional Vibration of Rods
39 Mod-9 Lec-5 Transverse Vibration of Beams, Equations of Motion and Boundary Conditions
40 Mod-9 Lec-6 Transverse Vibration of Beams: Natural Frequencies and Mode Shapes

Say and share some thing about these videos...